Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Union City, CA
Gate installation in Union City means working with two distinct property types: the aging single-family homes around Decoto and Alvarado with original gates from the 1960s and 70s, and the newer townhome and apartment communities along the 94587 corridor that rely on shared automatic gates. We’re Gate Repair Pleasanton, and we’ve served Union City since 2016, installing and repairing gates across both ZIP codes. Understanding which category your property falls into determines everything about the job, from footing work to operator selection. Call (833) 593-6440 for a free estimate.
Why Union City Homes Are Different
Union City’s gate work splits along a clear line. The flatlands around Decoto and Alvarado are filled with post-war and 1960s-era tract homes, many with original wrought-iron driveway and pedestrian gates set into concrete footings poured fifty years ago. Those gates are now sagging, dragging, and failing at hinges and latches. The soil under them shifts through wet winters and dry summers, so a gate that worked fine in June can drag across the driveway by February. Along the 94587 corridor, the picture changes completely: dense 1980s-to-2000s townhome and apartment developments with shared perimeter gates and automatic operators that cycle dozens of times daily. Those systems wear differently. They need commercial-grade parts, not a handyman with a wrench. The repair mix here isn’t the same as Fremont or Hayward, where newer single-family stock dominates. Union City demands a gate specialist who handles both aging iron and modern automation.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Union City Services
Two services cover most of what we do in Union City: repairing existing gates and repairing the electric systems that move them. Each has its own dedicated service page for Union City.
Gate Repair in Union City
Older Union City gates fail in predictable ways. Winter moisture rusts hinges and post bases, while summer-dry soil lets posts shift and settle. Along the older Decoto streets, we regularly see original wrought-iron gates where the real problem is the footing, not the hinge. We reset posts, repour footings, replace sagging hinges, and rebuild latches on gates that have served these homes for decades. When a 50-year-old iron gate drags or won’t latch, the fix usually involves more than a bolt adjustment. Gate Repair in Union City
Electric Gate Repair in Union City
The multi-unit communities in the 94587 corridor depend on automatic gates for daily access, and when an operator fails, every resident feels it. We diagnose motors, control boards, safety sensors, and remote systems across every major brand, from consumer units like Mighty Mule and Ghost Controls to commercial operators like LiftMaster, FAAC, and DoorKing. Union City’s shared gates cycle more often than typical residential units, so components wear faster. We identify the actual fault and replace only what’s broken. Electric Gate Repair in Union City
Gate Installation in Union City
Gate installation in Union City starts with the footing. On older Decoto and Alvarado properties, original gates were often set into shallow concrete that’s now cracked and shifting after decades of East Bay wet-dry cycles. Installing a new gate means evaluating what’s under it, not just bolting steel to a post. We handle new installations, full Gate Installation, from single-family driveway gates to shared community gates, with the same specialist team that repairs the brands we know inside out.
Automatic Gate Installation
Signs you need it
Your existing gate is manual and you want keypad or remote access, or your current automatic system is beyond reliable repair.
What it costs in Union City
Automatic gate installation in Union City typically runs $3,000 – $9,500 depending on gate size, operator brand, and concrete work required.
How we do it
We assess the driveway or entry, pour or upgrade footings as needed, mount the gate and operator, run power and safety sensors, then program remotes and keypads.
Driveway Gate Installation
Signs you need it
Your old driveway gate is sagging, rusted through, or dragging across the concrete and repairs would cost more than replacement.
What it costs in Union City
A new driveway gate in Union City generally falls between $2,500 and $8,000 including posts, hinges, and labor.
How we do it
We remove the old gate, inspect and reset or repour footings, install the new gate with proper clearance, and adjust for smooth swing or slide.
Sliding Gate Installation
Signs you need it
Your property has a steep or short driveway where a swing gate won’t clear, or you need a space-saving gate for a narrow entry.
What it costs in Union City
Sliding gate installation in Union City typically costs $3,500 – $10,000 with track, rollers, and operator included.
How we do it
We set a level track and concrete base, hang the sliding panel with proper roller alignment, mount the motor, and tune travel limits.
Electric Gate Installation
Signs you need it
You want to automate an existing manual gate or install a new gate with full electric operation from day one.
What it costs in Union City
Electric gate installation in Union City runs $3,000 – $9,500 covering the gate, operator, wiring, sensors, and programming.
How we do it
We install or upgrade the gate, mount the operator, run power to the location, fit safety edges and photo eyes, and program all controls.
What Gate Installation Costs in Union City
| Item | Typical range in Union City |
|---|---|
| Automatic gate installation | $3,000 – $9,500 |
| Driveway gate installation | $2,500 – $8,000 |
| Sliding gate installation | $3,500 – $10,000 |
Union City’s older concrete work can push prices up when footings need full replacement rather than patching. The quote you get before work starts is the price you pay.
Do I need a permit to install a gate in Union City?
Most driveway gate installations don’t require a permit, but automatic gates with vehicle detection loops or property-line work may. We’ll check Union City’s current requirements for your specific job and handle any filings needed.
How long does gate installation take in Union City?
Most residential gate installations take one to two days on site. Jobs requiring full footing replacement or significant concrete curing may add a day or two. We’ll give you a firm timeline with your quote.
Brands We Service in Union City
We service Viking, Ghost Controls, DoorKing, and Elite equipment, along with five other major gate brands. Common control boards, remotes, and safety sensors for these systems are stocked locally, which keeps most Union City repairs to a single visit. Our brands page covers the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Union City, CA
| Service | Typical range in Union City |
|---|---|
| Gate repair | $150 – $750 |
| Electric gate repair | $200 – $1,200 |
| Gate installation | $2,500 – $8,000 |
| Automatic gate installation | $3,000 – $9,500 |
| Electric gate installation | $3,000 – $9,500 |
| Sliding gate installation | $3,500 – $10,000 |
| Driveway gate installation | $2,500 – $8,000 |
| Hinge replacement | $150 – $400 |
| Post replacement or resetting | $300 – $900 |
In Union City, prices climb when footings from the 1960s and 70s need full replacement instead of shimming, and when shared community gates need commercial-grade operators rather than residential units. Every price is quoted and agreed before any work begins.
Neighborhoods We Serve in Union City
We work across Union City regularly, from the older Decoto streets to the townhome communities along the 94587 corridor. Most areas see us within one business day for gate repairs, and installation estimates are typically scheduled within the same week.
- Decoto
- Alvarado
- Mission Gateway area
- Union Landing vicinity
- Seven Hills
Service Area – Cities Near Union City
Beyond Union City, we serve neighboring East Bay communities with the same gate-specialist approach. That includes Newark, CA to the north, Fremont, CA across the bay side, Hayward, CA to the northwest, and Castro Valley, CA up the hills.
Serving Union City, CA – Our Local Coverage Area
We’re based in the Union City area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Union City
Most Union City gate emergencies get same-day or next-day service. If your gate is stuck open or won’t close, call (833) 593-6440 and we’ll work you into the schedule. Shared community gates get priority since they affect every resident’s access.
It depends on the community. In Union City townhome and apartment complexes, shared perimeter and entry gates are almost always the HOA or property manager’s responsibility. Individual driveway gates on single-family homes are homeowner-led. We work with both directly.
Yes. We serve 94536 and 94587, covering the older flatland neighborhoods around Decoto and Alvarado as well as the newer multi-unit developments along the eastern corridor. Estimates are free anywhere in Union City.
If your gate is sagging, stuck, or won’t respond to remotes, call Gate Repair Pleasanton at (833) 593-6440. We’ll diagnose it, quote it upfront, and get it moving again.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Union City Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Kevin Gallagher"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
- Brooke Barrett"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Marisol Flores