Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Hayward, CA
Gate installation in Hayward means working with homes and terrain that fight back. Most of our work in the 94541, 94542, and 94544 ZIPs involves replacing rusted steel driveway gates on 1920s – 1960s bungalows or fitting new automatic gates on hillside properties where the ground itself keeps shifting. We quote every job before work begins, and we install gates from brands we actually service: Viking, Ghost Controls, DoorKing, and Elite among them. Call (833) 593-6440 for a free measure and written estimate.
Why Hayward Homes Are Different
Hayward sits directly on the Hayward Fault, and the older residential stock from the 1920s through the 1960s was built long before modern seismic standards existed. That shapes nearly every gate job here. In the Hayward Hills and neighborhoods near the fault trace, gate posts lean out of plumb within a few years because creeping clay soil and minor quake settlement shift the ground under the post footings. A gate that drags on the latch side or swings open on its own is rarely a hinge problem on these properties. It is usually a post problem.
The climate compounds it. Hayward’s warm, dry summers and mild, wet winters make wood gates shrink and swell seasonally. Winter rains soften hillside soils, and posts that held fine through October start leaning by February. Many of the older redwood gates we see have dry rot at the rails where moisture sits, while the steel frames on newer infill homes rust at the welds. That combination of seismic movement, clay soil, and seasonal moisture means gate repair and installation in Hayward is genuinely different from work in flatter, less active parts of the East Bay. We plan for that from the first measure.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Hayward Services
Hayward homeowners and property managers call us most often for two things: getting a failed gate working again and getting an automated system back under control. Both are jobs our team handles directly, in Hayward, without subcontracting.
Gate Repair in Hayward
Older Hayward gates fail in predictable ways: rusted hinge pins, racked frames from soil movement, sagging corners on wood gates, and posts that have shifted out of plumb. We see it across the 1920s-era neighborhoods and the hillside lots equally, though the causes differ. A sagging gate on a flat 94544 lot is usually a hinge or frame problem. A sagging gate in the Hayward Hills is often a post that has crept downhill through winter rains. We diagnose the actual cause, not just the symptom, and we work on the brands homeowners already have, including DoorKing and Elite operators paired with older iron gates. Get the full breakdown of what we handle on our dedicated page for Gate Repair in Hayward.
Electric Gate Repair in Hayward
Automatic gates in Hayward have a failure pattern tied to our local conditions. Control boards fail after power surges, safety photo eyes drift out of alignment when posts shift, and motors burn out fighting a gate that soil creep has pulled into a bind. We service Viking, Ghost Controls, DoorKing, and Elite operators in addition to the other major brands we carry parts for. When your remote works but the gate won’t move, or the gate moves but the safety edge trips constantly, we trace the fault through the motor, board, and sensors rather than guessing. Homeowners and commercial properties both call us for this, and our page on Electric Gate Repair in Hayward covers what’s involved.
Gate Installation in Hayward
Gate installation in Hayward means accounting for the ground you’re building on. Many single-family homes in the 94541, 94542, and 94544 ZIPs date from the 1920s through the 1960s, with detached garages and original wood or metal driveway gates that have outlived their posts. Newer hillside homes often have custom wrought-iron or automatic gates, and those need post footings engineered for clay soil that moves. Our team handles the full job: spec the gate and operator, set posts in concrete to a depth that resists Hayward’s seasonal soil shift, hang and align the gate, wire the automation, and program remotes and keypads. We work with brands we service every week, including Viking, Ghost Controls, and DoorKing. Call (833) 593-6440 for a free on-site measure and a written price before any work starts, or read more about our full Gate Installation service.
Automatic Gate Installation
Signs you need it
You’re opening and closing a heavy driveway gate by hand daily, delivery drivers can’t reach your property, or you want controlled access without a full-time attendant.
What it costs in Hayward
Automatic gate installation in Hayward typically starts around $3,950 and can exceed $11,000 for long runs, hillside post work, or commercial operators.
How we do it
We measure the opening, spec the right operator, set and brace posts, run power and low-voltage wiring, mount the motor and safety edges, then program remotes and keypads.
Electric Gate Installation
Signs you need it
You want remote or keypad entry on a new gate, or you have a manual gate you’re ready to automate without replacing the gate itself.
What it costs in Hayward
Electric gate installation in Hayward runs roughly $2,600 to $7,800 depending on operator size, gate weight, and how far power needs to be run.
How we do it
We mount the operator, wire the control board, align photo eyes and safety edges, set travel limits, and test the full system before leaving.
Driveway Gate Installation
Signs you need it
Your old driveway gate is rusted through, sagging beyond repair, or too narrow for modern vehicles.
What it costs in Hayward
Driveway gate installation in Hayward varies with material and size, with most residential projects falling between $4,500 and $14,000 for custom gates and posts.
How we do it
We remove the old gate, install new posts in concrete to a depth suited for Hayward’s clay soil, hang the new gate, and align the hardware for a clean swing or slide.
Sliding Gate Installation
Signs you need it
Your driveway slopes sharply, your property has limited swing clearance, or you want a cantilever gate that never touches a ground track.
What it costs in Hayward
Sliding gate installation in Hayward typically costs $5,500 to $16,000, with cantilever hardware and longer runs pushing the price higher.
How we do it
We set concrete footings, mount the track or cantilever rollers, hang the gate, set travel stops, and wire the operator if you want it automated.
What Gate Installation Costs in Hayward
| Item | Typical range in Hayward |
|---|---|
| Electric gate installation | $2,600 – $7,800 |
| Automatic gate installation | $3,950 – $11,000+ |
| Driveway gate installation | $4,500 – $14,000 |
Hillside post work, long power runs, custom wrought iron, and commercial operators all push a Hayward installation toward the top of these ranges. Clay soil and seismic creep also mean we dig deeper footings than a flat Fremont or Union City lot would need, and that adds labor and concrete to the final number.
Do you handle the power run and the safety edges?
Yes. We run line voltage and low-voltage wiring to the operator, install and align photo eyes, wire safety edges, and set any required vehicle detection loops. The price is quoted before work starts.
How long does a Hayward gate installation take?
Most residential installations take one to two days, including concrete cure time. Custom wrought iron gates or hillside post work in clay soil can add a day or more. We give a schedule with your written estimate.
Brands We Service in Hayward
We service Viking, Ghost Controls, DoorKing, and Elite operators on a near-daily basis in Hayward, and we carry common control boards, photo eyes, remotes, and safety parts for these systems in our local stock. That means fewer Hayward jobs sit waiting on a shipped part. More detail on our full brand range can be found at our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Hayward, CA
| Service | Typical range in Hayward |
|---|---|
| Gate repair | $150 – $850 |
| Electric gate repair | $175 – $1,200 |
| Gate installation | $800 – $9,800 |
| Automatic gate repair | $180 – $1,100 |
| Sliding gate repair | $175 – $950 |
| Driveway gate repair | $150 – $850 |
| Gate opener repair | $160 – $850 |
| Gate opener installation | $180 – $1,000 |
| Electric gate installation | $2,600 – $7,800 |
| Automatic gate installation | $3,950 – $11,000+ |
| Driveway gate installation | $4,500 – $14,000 |
Hillside lots, seismic post movement, long power runs, and custom gate sizes push Hayward jobs toward the higher ends of these ranges. Whatever the number, you’ll see it in writing and agree to it before any work begins. No surprises on the invoice.
Neighborhoods We Serve in Hayward
We cover all four Hayward ZIPs: 94541, 94542, 94543, and 94544. Our most frequent gate repair and installation work comes from the Hayward Hills, Glen Eden, Southgate, Burbank, and the older bungalow streets around downtown and the 94541 corridor.
- Hayward Hills
- Glen Eden
- Southgate
- Burbank
- Downtown Hayward
We schedule Hayward calls by neighborhood on set days of the week, which keeps drive time short and gets you seen sooner. Give us your address when you call and we’ll tell you the next open slot in your area.
Service Area – Cities Near Hayward
Beyond Hayward, our team covers the nearby East Bay communities where many of the same fault-line and clay-soil conditions apply. We serve Castro Valley, CA, San Lorenzo, CA, Union City, CA, and Fremont, CA with the same specialist team and the same brand coverage. If you’re just over a city line, call (833) 593-6440 and we’ll confirm the next available Hayward-area route.
Serving Hayward, CA – Our Local Coverage Area
We’re based in the Hayward area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Hayward
We schedule Hayward service calls on regular weekly routes, which means most homeowners are seen within a few business days. Urgent failures are triaged case by case. Call (833) 593-6440 and we’ll give you the next open window in your neighborhood.
Most residential gate replacements in Hayward do not need a permit, but new automatic gates on certain hillside or corner lots can trigger city review. We check the requirements for your specific street and handle the permit paperwork if one is required. Nothing is started until that’s clear.
Yes. The Hayward Fault runs through the city, and creep from the fault plus clay soil movement regularly pushes posts out of plumb. That is the single biggest reason Hayward gates lean, rack, or stop closing correctly, and it’s why we set deeper footings here than in flatter cities.
Call (833) 593-6440 for a free estimate on any gate repair, electric gate repair, or gate installation in Hayward. We’ll give you a straight answer, a written price, and a date we can start.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Hayward Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Alejandro Salazar"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Holly Ackerman"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Kevin Gallagher