Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across San Lorenzo
Electric gate repair in San Lorenzo typically runs $180 – $480 depending on whether we’re fixing a stretched chain, replacing a control board, or rebuilding a hinge post. Most jobs in the 94580 zip code are completed the same day we arrive, because our trucks leave Pleasanton stocked for the specific failures we see in mid-century tract neighborhoods. San Lorenzo’s gates don’t fail like newer subdivisions’ gates do. They’re older, heavier, and set in soil that moves. That’s the reality we work with every week here.
If your gate is stuck open, stuck closed, or stopping midway and beeping, call (833) 593-6440. Arturo Zamora and our Electric Gate Repair team know what’s happening before we even back the truck up your driveway.
Why Gate Repair Pleasanton Is San Lorenzo’s Preferred Electric Gate Repair Company
San Lorenzo’s housing stock is unusual. These are post-WWII ranch homes, most built between the late 1940s and early 1960s, with original gates that have been repaired, re-hung, and modified for six decades. A general handyman shows up, looks at a sagging 1962 wrought-iron driveway gate, and starts guessing. We don’t guess. We’ve diagnosed operators on these exact gate styles enough times that the failure pattern is recognizable before we touch a multimeter.
Arturo Zamora runs every San Lorenzo job with one rule: fix the gate, not just the symptom. When a LiftMaster opener burns out because the gate itself has swollen and binds against the post, replacing the operator without fixing the gate means another failure in eight months. San Lorenzo homeowners don’t need that cycle. They need it done once.
We’re a dedicated gate specialist, which means every part on the truck, every diagnostic tool, and every hour of training is focused on one trade. Not HVAC. Not plumbing. Gates. That focus shows when we arrive at a home on Via Arriba or Bockman Road and get the gate moving before the homeowner finishes explaining when it first started acting up.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Commercial Gate Operator in San Lorenzo
A Commercial Gate Operator in San Lorenzo has to handle something residential openers don’t face: relentless daily cycling. The apartments along Hesperian Boulevard, the small industrial lots off Grant Avenue, and the church parking lots scattered through the unincorporated county all run gates dozens or hundreds of times per day. That’s a different load profile than a driveway gate that opens four times.
Commercial operator repair in San Lorenzo typically runs $350 – $900 for control board replacement, motor service, or safety loop repair. New commercial operator installations start around $1,800 and climb with gate width, weight, and access control integration. Every price is quoted and agreed before any work starts, so there’s no invoice surprise when we’re done.
Heavy-Duty Operator Diagnostics
We service FAAC, BFT, DoorKing, Viking, and Linear commercial operators, and the brand determines how we approach diagnosis. A DoorKing slide operator that won’t close usually points to a safety loop fault. A Viking swing operator that stops midway often has a limit switch or torque sensor issue. We test the full circuit before recommending any part replacement.
Access Control and Safety Compliance
Commercial gates in San Lorenzo are often code-controlled or tied to a keypad or phone entry system. When the operator fails, we check the external safety devices too: photo eyes, edge sensors, and ground loops. A gate that reverses or stops unpredictably is a serious safety hazard, and we treat that with the urgency it deserves. Repairs that involve line voltage or high-tension gate hardware should always be handled by a qualified technician, not attempted on a ladder with household tools.
Gate Opener Repair in San Lorenzo
Gate Opener Repair in San Lorenzo usually involves one of three failures we see over and over: a motor that hums but doesn’t move the gate, a control board that won’t respond to remotes or keypads, or a limit switch that lost its setting after the gate shifted. Homes on Via Pascoli and Via Manzoni, with their narrow side yards and fifty-year-old gate posts, give us two or three of these calls a month.
Opener repair on a residential swing gate in San Lorenzo runs $180 – $420 including parts for most common failures. If the operator is beyond repair and needs replacement, a new residential swing opener with installation starts around $750. We quote the exact number before touching a single bolt.
Motor and Control Board Replacement
When a motor seizes or a board fails, owners sometimes assume the whole system is scrap. It usually isn’t. Ghost Controls, Mighty Mule, and LiftMaster residential operators all have replaceable boards and motors, and stocking those parts means we can often complete the repair on the first visit. A board is a $150 – $350 part. A new gate is thousands. We fix what’s fixable.
Remote, Keypad, and Safety Sensor Work
A “broken gate opener” is often a broken signal. San Lorenzo’s wet winters corrode keypad contacts and remote battery terminals faster than inland areas. We carry replacement transmitters, keypads, and photo eyes for all nine brands we service, so we can restore access without a second trip. Safety sensor faults are especially common when a winter-soaked wood gate has swollen enough to break the photo beam alignment.
Trusted Brands We Service in San Lorenzo
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we stock common parts for each one on our trucks. That’s not something most gate repair companies in the East Bay can say. When your DoorKing slide operator drops a limit switch or your Elite swing arm won’t respond to the remote, we’re not waiting on a parts shipment. We handle residential openers like Ghost Controls and Mighty Mule, and commercial-grade equipment like FAAC and Viking, under the same roof. One call covers the full range.
Common Electric Gate Repair Problems We See in San Lorenzo Homes
These are the failures we see most often in the 94580 neighborhoods. They’re specific to San Lorenzo’s climate and housing age, and they explain a lot of “mysterious” gate behavior:
- Winter-swollen wood gates straining the operator: Wet winters soak original mid-century gates, making the wood swell and bind against the post. The operator pushes harder, draws more current, and eventually trips its thermal overload or burns the motor. Often the repair is on the gate, not the opener.
- Summer-shrunk hinges loosening and causing sag: After the dry season pulls moisture out of the wood, hinge screws back out and the gate drops. A sagging gate drags on the driveway or won’t close the final two inches, which makes the opener reverse as a false obstruction.
- Clay-soil post shifting triggering safety faults: San Lorenzo sits on expansive clay that swells with winter rain and contracts in summer. Hinge posts set decades ago shift a quarter inch or more, which misaligns the photo sensors. The gate starts, stops, and reverses for no reason the homeowner can see.
- Side-yard gate failures blocking garbage and utility access: This is the one that gets urgent. On many San Lorenzo lots the side yard is the only rear access, so when that gate won’t open, wheelie bins can’t get out and utility meters can’t be read. We treat those as priority calls.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in San Lorenzo, CA
Here’s what electric gate repair actually costs in San Lorenzo. A residential opener repair, like a bad limit switch or a failed control board on a LiftMaster or Ghost Controls unit, runs $180 – $420. A new residential swing opener with installation starts around $750. Commercial operator work, which we do for properties on Hesperian and around the unincorporated industrial pockets, ranges from $350 – $900 for repairs and starts at $1,800 for a new operator install. Gate motor replacement falls in the $250 – $500 range for most residential brands we service. Every quote is given and approved before work begins. Call (833) 593-6440 and we’ll give you a straight number.
We Also Serve Cities Near San Lorenzo
Our San Lorenzo work puts us within easy reach of the surrounding East Bay communities. We regularly run Electric Gate Repair in San Lorenzo calls in Castro Valley, Hayward, Union City, and Newark – same team, same stocked trucks, same specialist expertise. If your property sits just over the border in any of those cities, call and ask about dispatch times.
Serving San Lorenzo, CA – Our Local Coverage Area
We’re based in the San Lorenzo area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in San Lorenzo
In San Lorenzo, an opener that keeps stopping is usually fighting a gate that has swollen or sagged. Winter moisture swells original wood gates, and summer dryness loosens hinges, both of which make the operator work harder until its safety systems trip. We check the gate’s physical condition and the opener’s settings together, because fixing one without the other means it stops again in a few months. Call (833) 593-6440 and we’ll diagnose both.
Yes, solar power is a practical option for San Lorenzo gates, especially on long driveways or side-yard gates where running conduit to mains power isn’t worth the trenching cost. We install and integrate solar panels and battery systems with most residential openers, including Mighty Mule and Ghost Controls units. The Bay Area’s sunny summers give good charging capacity, though winter output drops and we size the battery bank accordingly.
An automatic gate in San Lorenzo needs functioning entrapment protection: photo sensors that detect an obstruction across the gate path, and on newer installations, contact or edge sensors that reverse the gate if something touches it. A gate that reverses without a visible cause often has misaligned sensors after post movement in the clay soil. We calibrate and test every safety device on every repair visit, because a closing gate isn’t something to gamble with.
Yes, and this is one of the most common urgent calls we get from San Lorenzo homeowners. Many lots here use the side yard as the only rear access, so a dragging gate blocks garbage service and utility access, not just foot traffic. We correct the sag by resetting or reinforcing the hinge post, replacing the hinge hardware, or trimming and re-hanging the gate, then we re-calibrate the operator. Most of these repairs are completed the same day.
Yes, we service commercial gate operators throughout San Lorenzo, including slide and swing operators on apartment complexes, business lots, and institutional properties. We work on FAAC, BFT, DoorKing, Viking, and Linear commercial systems, and we carry test equipment and common replacement parts for each. Commercial repair pricing is quoted on-site after diagnosis, and the price is approved before work begins. Call (833) 593-6440 with your gate’s brand and what it’s doing – we’ll tell you what to expect.
Call Gate Repair Pleasanton for Electric Gate Repair in San Lorenzo
When your gate won’t open, every hour it sits broken is an hour your access is compromised. Our San Lorenzo calls are answered by the same specialists who do the work, not a call center. Tell us what the gate is doing, what brand it is, and where you are – we’ll give you a straight answer on timing and cost. Free estimates. Upfront pricing. One call to (833) 593-6440 and we’ll get you moving again.
Written by Arturo Zamora, Owner at Gate Repair Pleasanton, serving San Lorenzo and the East Bay.